Accent L Hatch Back L4-1495cc 1.5L SOHC MFI (2000)
Upper Side Moulding / Trim: Service and Repair
ROOF MOLDING
1. Pry up the roof molding with a flat tip screwdriver as shown in the illustration.
NOTE: When prying with a flat tip screwdriver, wrap it with protective tape to prevent damage.
Take care not to scratch the body and roof molding use protective tape on the body.
2. Pull the roof molding up, then remove the roof molding.
6. Installation is the reverse of the removal.
NOTE: If necessary, replace any damaged clips.