Accent L Hatch Back L4-1495cc 1.5L SOHC MFI (2000)
3. Install the timing belt so as not to allow slack to the tension side.
Make sure that all timing marks are at their correct position with the tension side in a strained state by applying force to the camshaft sprocket in a
counterclockwise direction.
REASSEMBLY
1. Install the flange and crankshaft sprocket as shown.
Pay close attention to their mounting directions.
Tightening torque
Crankshaft sprocket bolt: 140 - 150 Nm (1400 - 1500 kgf-cm, 103 - 111 ft. lbs.)
2. Install the camshaft sprocket and tighten the bolt to the specified torque.
Tightening torque
Camshaft sprocket bolt: 80 - 100 Nm (800 - 1000 kgf-cm, 59 - 74 ft. lbs.)
3. Align the timing marks of the camshaft sprocket and crank shaft sprocket, with the No.1 piston placed at top dead center on its compression stroke.