Accent L Hatch Back L4-1495cc 1.5L SOHC MFI (2000)
Turn Signal Flasher: Testing and Inspection
FLASHER UNIT
1. Remove the flasher unit from the relay box in the passenger compartment.
2. Connect the positive (+) lead from the battery to terminal 2 and the negative (-) lead to terminal 3.
3. Connect the two turn signal lamps parallel to each other to terminals 1 and 3, check that the bulbs turn on and off.
NOTE: The turn signal lamps should flash 60 to 120 times per minute. If one of the front or rear turn signal lamps has an open circuit, the
number of flashes will be more than 120 per minute. If operation is not as specified, replace the flasher unit.
