Accent L Hatch Back L4-1495cc 1.5L SOHC MFI (2000)
ECM SPECIFICATION TABLE:
CAUTIONS BEFORE REPROGRAMMING:
1.
Conduct reprogramming with the ignition key in the "ON" position.
2.
Be careful not to disconnect any cables connected to the vehicle or Hi-Scan Pro during reprogramming.
WARNING:
If reprogramming is interrupted, the manual update procedure must be used.
3.
Do not start the engine during reprogramming.
4.
Do not turn the ignition key off during reprogramming.
5.
When the reprogramming is completed, turn off the ignition key for 20 seconds before starting the engine.
REPROGRAMMING PROCEDURE:
NOTE:
Verify that the vehicle is affected by identifying the vehicle production date and VIN.
EXPLANATION OF ERROR MESSAGE:
1.
"INVALID PASSWORD": Please enter the correct password again.
2.
"REPROGRAMMING ERROR PLEASE WAIT FOR RETRY": An error occurred during reprogramming, the Hi-Scan Pro will retry the
reprogramming automatically.
3.
"ALREADY REPROGRAMMED" or "INCORRECT TARGET ID": The reprogramming has previously been done on this vehicle or the ECM is
not the type subject for this reprogramming procedure.
4.
"REPROGRAM ERROR PLEASE CHECK THE SYSTEM": In this case you must reprogram manually after selecting the menu option "02. IC
00-01 MY ACCELERATION (ERROR MODE]".