Accent L Hatch Back L4-1495cc 1.5L SOHC MFI (2000)
Refrigerant Pressure Sensor / Switch: Testing and Inspection
TRIPLE PRESSURE SWITCH
1. Install the manifold gauge set.
2. Start the engine and turn A/C switch ON.
3. Open the hand valves of the low pressure service port and the high pressure service port.
Pressure S/W Operating Conditions
4. Check the pressure readings on the manifold gauge indicator.
5. For the continuity inspection, disconnect the connector of the triple (dual) pressure switch.
6. Check the continuity between the four (two) terminals of the triple (dual) pressure switch shown in the below figure. And refer to the "Pressure
S/W operating conditions". If defective, replace the triple (dual) pressure switch.
