Accent L Hatch Back L4-1495cc 1.5L SOHC MFI (2000)
Starter Drive/Bendix: Adjustments
PINION GAP ADJUSTMENT
1. Disconnect the wire from the M-terminal.
2. Connect a 12 V battery between the S-terminal and the M-terminal.
3. Set the switch to "ON", and the pinion will move out.
CAUTION: This test must be performed quickly (in less than 10 seconds) to prevent the coil from burning.
4. Check the pinion to stopper clearance (pinion gap) with a feeler gauge. If the pinion gap is out of specification, adjust by adding or removing
washers between the solenoid and the front bracket.
PINION GAP : 0.5 - 2.0 mm (0.0197 - 0.079 in.)
