Accent L Hatch Back L4-1495cc 1.5L SOHC MFI (2000)
1. Check for the damage of the gear housing cylinder bore
2. Boot damage, cracking or aging
ASSEMBLY
1. Apply the specified oil to the entire surface of the rack oil seal.
Recommended oil: Power steering fluid 3 type
2. Install back-up washer and oil seal to the specified position in the gear housing.
3. Apply the specified grease to the entire surface of the needle bearing.
Recommended grease: Multipurpose grease SAE J310, NLGI No.2
4. Set the scribed side of the needle bearing in the Special Tool (09432-21600) and install it into the gear housing (until the special tool contacts the
gear housing).
CAUTION: Note the direction of the needle bearing.
5. Apply the specified grease to the ball bearing and install using the Special Tool (09222-21100).
NOTE: Always use a new bearing.
Recommended grease: Multipurpose grease SAE J310, NLGI No.2
6. Apply the specified oil to the entire surface of the rack bushing oil seal.
Recommended oil: Power steering fluid 3 type
7. Install the oil seal in the rack bushing.