Accent L Hatch Back L4-1495cc 1.5L SOHC MFI (2000)
2.
Remove the mounting nuts (10 mm, 2 each) that secure the harness grommet to the dash panel.
3.
Pull out the harness grommet.
4.
Locate the ATM diode wrapped with yellow tape and remove the yellow tape from the harness.
5.
Insert a screwdriver next to the tab. Lift the tab up and pry the diode from the holder.
6.
Clean the diode holder female connectors using aerosol contact cleaner such as:
NAPA Electronic Cleaner, P/N 765-1843
MOPAR MP-50 Electrical Contact Cleaner, P/N 04549626 or equivalent
