Accent L Hatch Back L4-1495cc 1.5L SOHC MFI (2000)
6.
Apply contact grease (P/N 00305-F0000-39, NYOGEL 760G), into all four terminal openings of the blue female connector until each terminal
opening is completely filled with grease.
7.
Reconnect the pulse generator connectors and reattach the connector to the bracket. Reinstall all removed components in the reverse order of
removal.
TCM SPECIFICATIONS
CAUTIONS BEFORE REPROGRAMMING:
1.
Conduct reprogramming with the ignition key in the "ON" position.
2.
Be careful not to disconnect any cables connected to the vehicle or Hi-Scan Pro during reprogramming.
3.
Do not start the engine or turn the ignition key off during reprogramming.
WARNING:
If reprogramming is interrupted, the manual update procedure must be used.
4.
When the reprogramming is completed, turn off the ignition key for 20 seconds before starting the engine.
TCM REPROGRAMMING PROCEDURE:
1.
Insert the 16 MB reprogramming card into the top slot of the Hi-Scan Pro.
2.
Connect the reprogramming adapter to the Hi-Scan Pro.
