Accent L Hatch Back L4-1495cc 1.5L SOHC MFI (2000)
2.
Assemble the double cone and synchronizer inner ring. Align the 4 lugs on the double cone with the 4 holes in the 1st speed gear when fitting the
double cone onto the synchronizer.
3.
Assemble the synchronizer spring and the synchronizer outer ring. (Synchronizer spring is not directional.)
NOTE:
The waved synchronizer spring is flattened and acts as a synchronizer key when installed.
4.
Assemble the double cone assembly and 1st speed gear. When installing, align the grooves in the synchronizer inner ring with the lugs on the outer
ring.
Completed sub-assembly
Assembly method for synchronizer hub to synchronizer sleeve