Azera V6-3.3L (2007)
Tilt Actuator List
ADM, DDM, IMS Self Diagnostic Function
ADM, DDM, IMS SELF DIAGNOSTIC FUNCTION
1. It can be communicated with scan tool through of BCM.
2. BCM receives the commands from scan tool and remits to DDM, ADM and IMS units with CAN. BCM receives the response from the units with
CAN inversely, and feedback to scan tool with CAN.
3. Input display and output forced drive can be performed in each of DDM, ADM and IMS units. Though, failure diagnosis is limited to the certain
diagnosis ranges.
BCM Current Data
BCM CURRENT DATA
The body control module can diagnose with the diagnosis tool more quickly.
The BCM communicates with the diagnosis tool and then reads the input/output value and drives the actuator.
BCM Diagnosis With Scan Tool
BCM DIAGNOSIS WITH SCAN TOOL
1. It will be able to diagnose defects of BCM with scan tool quickly. Scan tool can operates actuator forcefully, input/output value monitoring and
self diagnosis.