hyundai Workshop Repair Guides

Hyundai Workshop Service and Repair Manuals

Campaign TE6 - Inside Trunk Release Handle Inspection|Page 822 > < Campaign TE6 - Inside Trunk Release Handle Inspection|Page 813
Page 1
background image

Trunk / Liftgate Latch Release Cable: Recalls
Campaign TE6 - Inside Trunk Release Handle Inspection

Group CAMPAIGN

Number 11-01-004-1

Date FEBRUARY, 2011

Model 2011 ELANTRA (UD)

SUBJECT:
TRUNK RELEASE HANDLE OPERATION (SERVICE CAMPAIGN TE6)

THIS BULLETIN SUPERSEDES TSB 11-01-004 TO REMOVE THE PART NUMBER FOR THE CABLE ASS Y-T/LID RELEASE.

IMPORTANT:

DEALER MUST PERFORM THIS CAMPAIGN ON ALL AFFECTED VEHICLES PRIOR TO CUSTOMER RETAIL DELIVERY AND
WHENEVER AN AFFECTED VEHICLE IS IN THE SHOP FOR ANY MAINTENANCE OR REPAIR.

IMPORTANT:

WHEN A VEHICLE ARRIVES AT THE SERVICE DEPARTMENT, ACCESS HYUNDAI MOTOR AMERICA'S "WARRANTY VEHICLE
INFORMATION" SCREEN VIA WEBDCS TO IDENTIFY OPEN CAMPAIGNS.

DESCRIPTION:

Some vehicles inside trunk release handle may not operate.

VEHICLES AFFECTED:
Model: 2011 MY ELANTRA (UD)

Affected Vehicles: Production date range:
^ November 11, 2010 - November 30, 2010 

PARTS INFORMATION:
Inspection and repair of trunk release handle operation.

INSPECTION:

1. Start with the trunk closed and latched.

2. Pull trunk release handle up through the full range of motion, and let spring force return the handle to the neutral position. (Once at the top of the pull,

Campaign TE6 - Inside Trunk Release Handle Inspection|Page 822 > < Campaign TE6 - Inside Trunk Release Handle Inspection|Page 813