Elantra L4-1595cc 1.6L DOHC (1993)
Oil Pressure Sender: Technical Service Bulletins
Oil Pressure Switch - Specification Revision
Group: ENGINE MECHANICAL
Number: 93-20-017
Date: SEPTEMBER, 1993
Model: ALL
Subject:
OIL PRESSURE SWITCH SPECIFICATIONS - SHOP MANUAL REVISIONS
DESCRIPTION
The oil pressure switch specifications in Volume 1 of the Shop Manuals listed have been revised.
Please write the TSB number in the revision boxes on the relevant pages.
SHOP MANUALS AFFECTED
OIL PRESSURE SWITCH
The oil pressure switch is located at the center of the right-hand side of the engine. If the oil pressure in the lubricating system drops below 28 kPa (4
psi) during normal operation, the oil pressure warning light will come on. The hexagonal portion of this switch is 26 mm (1.024 in:) wide across the flats.
REMOVAL AND INSTALLATION
Using the special tool (09260-32000), install the oil pressure switch after applying sealant to the threaded area.
Sealant: Threebond 1104 or equivalent