Elantra L4-1595cc 1.6L DOHC (1993)
1. Install crankshaft sprocket "B" into crankshaft.
CAUTION:
-
Pay special attention to the direction of the flange. If It Is installed in the wrong direction, a broken belt could result.
2. Lightly apply engine oil to the outer surface of spacer, and then install in the direction as shown in illustration.
3. Install counter balance shaft sprocket onto right counter balance shaft, and then tighten flange bolt finger tight.
4. Align timing mark on each sprocket with corresponding timing mark on the front case.
5. When timing belt "B" is installed, make certain that tension side has no slack. Install tensioner "B" with center of pulley located on the left side of
mounting bolt and with pulley flange directed toward front of engine.
