Elantra L4-1595cc 1.6L DOHC (1993)
6.
Disconnect the ECM connectors from the ECM.
7.
Strap the modulator and the extension harness together as shown in the illustration.
8.
Peel the protective covers off the two sided tapes on the surface of the adapter and attach the adapter to the ECM as shown in the diagram at the
right.
9.
Connect the extension harness connectors (red taped side) to the ECM and the control harness connectors to the adapter of the repair kit.
10.
Strap the extension harness, control harness and adapter together as shown in the illustration.
11.
Reinstall the relay box and control relay.
12.
Reinstall the lower side of the crash pad.
13.
Reconnect the battery negative terminal and start the engine to check if the connection is complete. Reset the customer's preset radio stations and
clock.
