Elantra L4-1595cc 1.6L DOHC (1993)
7.
Strap the modulator and the extension harness together as shown in the illustration.
8.
Peel the protective covers off the two sided tapes on the surface of the adapter and attach the adapter to the ECM as illustrated.
9.
Connect the extension harness connectors (red-taped side) to the ECM and the control harness connectors to the adapter of the repair kit.
10.
Strap the extension harness, control harness and the adapter together as shown in the illustration.
11.
Re-install the relay box and control relay.
12.
Re-install the lower side of the crash pad.
13.
Re-connect the battery negative terminal and start the engine to check if the connection is complete. Re-set the customers pre-set radio stations and
clock.
