Elantra L4-1595cc 1.6L DOHC (1993)
Band Apply Servo: All Technical Service Bulletins
A/T - Poor/Harsh 1st to 2nd Gear Upshifts
Group
40 - TRANSAXLE
Number
94-40-016
Date
09-1996
Model
Elantra 1992-1995, Excel 1990-1994, Scoupe 1991-1992 and Sonata 1989-1994
Subject
KICK DOWN SERVO SEAL REPLACEMENT AND SERVO ADJUSTMENT
THIS TSB SUPERSEDES TSB # 94-40-010 "KICKDOWN SERVO SEAL REPLACEMENT AND SERVO ADJUSTMENT."
DESCRIPTION:
The kickdown servo should be checked if the following conditions occur:
^
Poor shift quality on the 1-2 upshift
^
Harsh shift complaints that have developed after 15,000 to 20,000 miles.
The procedure below describes the inspection and repair of the kickdown servo.
SERVICE PROCEDURE:
1.
Wear proper eye protection and completely remove all dirt and other materials around the kickdown servo switch cover.
2.
Remove the snap ring.
3.
Remove the kickdown servo switch cover.
4.
Hold the kickdown servo rod from turning by holding the kickdown servo socket wrench (09454-33101B) and loosen the locknut by turning the
kickdown servo socket wrench (09454-33101A) counterclockwise.
5.
Loosen the locknut approximately 3-4 threads to the edge of the flat groove on the servo rod.
6.
Remove the inner snap ring.
