Elantra L4-1595cc 1.6L DOHC (1993)
Carrier Bearings: Technical Service Bulletins
M/T - Bearing Replacement Precautions
Group
40 - TRANSAXLE
Number
91-40-027
Date
08-1991
Model
Elantra 1992-1993, Excel 1986-1993, Scoupe 1991-1993 and Sonata 1989-1993
Subject
MANUAL TRANSAXLE BEARING REPLACEMENT
SERVICE PROCEDURE
Most manual transaxle bearings are manufactured and sold as a matched set consisting of an inner race, an outer race and roller/ball assembly. Therefore,
when installing a new bearing, be sure to also install the new bearing race using the procedure outlined in the manual transaxle section of the appropriate
Service Manual.
DO NOT reuse old inner or outer races with a new roller/ball assembly. Failure to replace entire matched set may cause accelerated wear on the new
bearing. This procedure should be followed any time a bearing is being replaced.
