hyundai Workshop Repair Guides

Hyundai Workshop Service and Repair Manuals

Body and Frame|Mirrors > < Vehicle - Perchlorate Material Handling/Disposal
Page 1
background image

Power Door Lock Actuator: Technical Service Bulletins
Keyless Entry Upgrade Kit - Door Solenoid Defect

Group: BODY ELECTRICAL
 
Number: 98-90-002
 
Date: FEBRUARY, 1998
 
Model: ALL

Subject    
SECURITY SYSTEM KEYLESS ENTRY UPGRADE KIT: DOOR SOLENOIDS

DESCRIPTION:
Some Hyundai Security System Keyless Entry Upgrade kit door solenoids may have their internal wiring reversed. When the Keyless Entry Upgrade Kit
is installed and activated, the door(s) may lock when it should unlock and vice versa.

If the Keyless Entry Upgrade Kit meets the following two conditions:

1.

The door solenoid's plastic housing is tan colored and

2.

The Keyless Entry Upgrade Kit was ordered from your local Parts Distribution Center (PDC) before December 31, 1997, it may be necessary to
reverse the connection of the door solenoid's red and blue wires to achieve the correct function.

SERVICE PROCEDURE:

1.

Install the Keyless Entry Upgrade Kit to the point of making the connection of the door solenoid wires.

2.

Temporarily connect the door solenoid wires and check the function of the door locks by arming and disarming the security system. If the door
locks function in reverse (that is, if they lock when they should unlock and vice versa), reverse the red and blue wires at the door solenoid
connection to achieve proper function.

3.

Continue with the installation per directions from the Upgrade Kit.

Body and Frame|Mirrors > < Vehicle - Perchlorate Material Handling/Disposal