Elantra L4-1595cc 1.6L DOHC 16 Valve (1995)
Technical Service Bulletin # 9560004
Date: 950801
Spoiler - Installation Instructions
Group: BODY
Number: 95-60-004
Date: AUGUST, 1995
Model: 1995 ELANTRA "SE"
Subject:
SPOILER INSTALLATION PROCEDURES
DESCRIPTION:
1995 Elantra SE's are available with two spoiler styles.
THIS BULLETIN CONTAINS THE FOLLOWING INFORMATION:
^
How to identify spoiler styles.
^
Installation instructions for both styles of spoilers.
^
Replacement part number list.
^
General painting instructions.
IDENTIFYING SPOILERS:
Two styles of spoilers are available on 1995 Elantra SE's. They can be identified by the Center High Mounted Stop Light [CHMSL] attachment method.
On P/N 00259-J5100 the CHMSL attaches from underneath (Fig. 4). On P/N 00259-J5200 the CHMSL attaches by sliding into a cutout on the rear of
the spoiler (Fig. 8). Refer to Parts Bulletin # 0905, dated May 31, 1995 for further information.
Installation Instructions - Type 1 Spoiler
INSTALLATION INSTRUCTIONS FOR 00259-J5100 SPOILER: TYPE 1
Figure 1
1.
Cut out left # 02 and right # 03 templates and tape to deck lid. (Fig. 1)
2.
Center punch the marked locations (2 on each side) and remove templates.
3.
At center punch locations, drill 1/8" pilot holes.
4.
Enlarge holes to 9/32", drilling through both skins of deck lid.
