Elantra L4-1595cc 1.6L DOHC 16 Valve (1995)
Recommended Spray Gun Setups:
Application:
Apply two to three medium wet coats until desired appearance is achieved.
Blending:
Tapered or dry 1080 S edges can be melted in with 1080 S that has been further reduced 200% (2:1) with 1075 S URO Clear
Reducer.
Retarder:
Use Retarder 8100 S up to 10% by volume.
Fish Eyes:
Use Additive 259 S up to one ounce per ready-to-spray gallon of URO Clear.
Dry Time
Air dry:
Dust free in approximately 15 minutes. Allow to dry overnight before reassembly and placing outdoors.
Force dry:
Allow 15 minutes flash after final coat, then force dry 30 minutes at 140°F (60° C).
Dry Time to Tape
Air dry:
Allow 24 hours before taping.
Force dry:
After spoiler cools.
Polishing
Air dry:
Allow 24 - 36 hours before polishing.
Force dry:
Wait 12 - 24 hours before polishing.
Cleanup:
Flush gun thoroughly with acrylic lacquer thinner 3602 S.
Re-Repair:
May be re-repaired at any time.