Elantra L4-1595cc 1.6L DOHC 16 Valve (1995)
Front case assembly
Tightening torque
* 27-34 Nm (270-340 kg.cm, 20-25 lb.ft)
All except* 20-27 Nm (200-270 kg.cm, 14-20 lb.ft)
Oil filter bracket bolts
15-22 Nm (150-220 kg.cm, 11-16 lb.ft)
6. Insert screwdriver through plug hole in left side of cylinder block to keep shaft in position, and then tighten.
7. Install a new 0-ring to the groove of front case.
8. Using special tool, install the plug case and tighten to specified torque.
9. Apply sealant into the groove of the pan flange as shown.
NOTE:
1) Apply sealant approx. 4 mm (0.16 in.) in thickness.
2) After application of sealant, do not exceed 15 mm minutes before installing the oil pan.
List what type of sealant to use.
