Elantra L4-1595cc 1.6L DOHC 16 Valve (1995)
Blower Motor Switch: Testing and Inspection
BLOWER SWITCH CHECK
1. Remove the heater control assembly with connector still
connected.
2. Connect jumper wire between M62;2 terminal and body ground.
3. Measure voltage between terminal 6 of blower switch (M62) connector and body ground when blower switch is and oft. If not ok, check fuse
No.12 and blower relay. If ok, perform next check 3.
4. Disconnect the blower switch (M62) connector from the heater control unit assembly.
5. Check continuity between blower switch terminals. If not ok, replace the blower switch.