Elantra L4-1595cc 1.6L DOHC 16 Valve (1995)
CAUTION: Rotate the crankshaft clockwise.
4. Remove the timing belt.
NOTE: If the timing belt Is reused, make an arrow mark Indicating the turning direction (or the front of the engine) to make sure that the belt is
reinstalled in the same direction as before.
5. Remove the camshaft sprockets.
NOTE: Be careful not to damage the cylinder head with the wrench.
INSPECTION
Sprockets, Tensioner Pulley, and Idler Pulley
1. Check the camshaft sprocket, crankshaft sprocket, tensioner pulley, and idler pulley for abnormal wear, cracks, or damage. Replace as necessary.
2. Inspect the tensioner pulley and the idler pulley for easy and smooth pulley rotation and check for play or noise. Replace as necessary.
3. Replace if there is a grease leak.
Auto Tensioner
1. Check the auto tensioner for leaks and replace as necessary.
2. Check the rod end for wear or damage and replace as necessary.
