hyundai Workshop Repair Guides

Hyundai Workshop Service and Repair Manuals

Tires - Defect Inspection Procedures|Page 1716 > < Tires - Defect Inspection Procedures|Page 1714
Page 6
background image

Fine cracks on the tire sidewall, running in a radial or circumferential direction. This type of crack may develop on the tire sidewall from ozone in the
atmosphere acting on the rubber. To replace a tire with this condition, refer to tire manufacturer's warranty booklet.

Observation(s):

Check for fine cracks on the tire sidewalk. These cracks are generally less than 1/10th of a inch in length and do not penetrate to the interior of the tire.

Prevention:

^

Store tires properly; keep tires away from direct sunlight, ozone sources, heat, wind, rain, etc.

^

Maintain proper inflation pressure

^

Avoid overloading

6.

BEAD AREA CRACKING

Separation of various tire materials (rubber, cord and wires) at the bead area near the rim line. Some of these can occur as a result of bead flow, pinched

Tires - Defect Inspection Procedures|Page 1716 > < Tires - Defect Inspection Procedures|Page 1714