Elantra L4-1595cc 1.6L DOHC 16 Valve (1995)
2.
Remove the clip that secures the temperature sensor to the valve body.
3.
Squeeze the tabs of the connector to release it from the transaxle case and pull the connector and the sensor from the case.
4.
Confirm that the replacement sensor operates within specifications using a DVOM and the chart in this bulletin.
5.
Install the new sensor into the clip, then onto the valve body and torque to 3 to 4 lb ft.
6.
Install the oil pan with a new gasket.
7.
Fill with ATF to the proper level according to the appropriate shop manual.
Note:
Always use Hyundai Automatic Transaxle Fluid or Chrysler Mopar ATF Plus type 7176. Do not use any type of Dexron of Mercon ATF.
