hyundai Workshop Repair Guides

Hyundai Workshop Service and Repair Manuals

Turn Signals - Will Not Cancel|Page 924 > < Turn Signals - Will Not Cancel|Page 918
Page 1
background image

Combination Switch: All Technical Service Bulletins
Turn Signals - Will Not Cancel

Group: Electrical
Number: 94-90-005
Date: May 1994
Model: 1995 Sonata & Elantra

Subject: 
Turn Signal Indicator Does Not Cancel

CONDITION:

The turn signal lever does not return to the middle position, and the turn signal indicator continues to flash after completing a left or right turn. This
condition may be the result of the white nylon signal cancelling lever arm sticking in the "down" or "up" position, and not returning to its center position.

CORRECTION:

The following procedure describes shimming the Lighting and Turn Signal Switch assembly cover plate to eliminate possible lever arm interference.

1.

Record all radio preset stations.

2.

Disconnect the negative terminal of the battery. Wait 30 seconds for the SRS system to discharge before proceeding.

Steering Column

3.

Remove the three screws (see illustration) securing the steering column shroud to the column. Separate and remove the upper and lower shrouds.

Turn Signal Switch

4.

Remove the two screws holding the Lighting and Turn Signal Switch assembly to the multifunction switch body.

5.

Remove the Lighting and Turn Signal Switch assembly from the multi-function switch assembly. Do not disconnect the switch harness.

Turn Signals - Will Not Cancel|Page 924 > < Turn Signals - Will Not Cancel|Page 918