Elantra L4-1595cc 1.6L DOHC 16 Valve (1995)
incorrect readings. Diodes and solid-state devices in a circuit can make an ohmmeter give a false reading. To find out if a component is affecting a
measurement, take one reading, reverse the leads and take a second reading. If the readings differ, the solid-state device is affecting the measurement.
Testing For Short to Ground
1. Remove the blown fuse and disconnect the battery and load.
2. Connect one lead of a self powered test lamp or an ohmmeter to the fuse terminal on the load side.
3. Connect the other lead to a ground.
4. Beginning near the fuse block move the harness from side to side. Continue this point (about six inches apart) while watching the self powered test
lamp or ohmmeter.
5. When the self powered test lamp glows, or ohmmeter registers, there is a short to ground in the wiring near that point.
Testing For Short to Power
1. Remove the blown fuse. Leave the battery connected.
