Elantra L4-1595cc 1.6L DOHC 16 Valve (1995)
9. Remove the bolt coupling the universal joint and pinion.
10. After removing the bolts used to secure the column bracket to the frame, remove the steering column and shaft assembly.
DISASSEMBLY
1. It necessary to remove the steering lock, cut a slot in the mounting screw heads and bracket with a hack saw. Loosen the screws with a flat-blade
screwdriver to remove the steering wheel lock.
CAUTION: When the steering wheel lock is reinstalled, the steering wheel lock assembly and screws should be replaced with new parts.
2. Remove the snap ring and remove the steering shaft downward.
3. If it is necessary to remove the steering column brackets, use a hack-saw to cut a groove on the head of the special bolt, and then use screwdriver
to remove the column brackets
