Elantra L4-1595cc 1.6L DOHC 16 Valve (1995)
If the voltage is correct, go to step 4.
If the voltage is incorrect, replace the stop lamp switch or repair the wiring. Go to step 4.
4.
Test the A/T shift lock solenoid:
Probe the red/green (R/G) wire on the backside of the connector to the A/T shift and key lock control module with a voltmeter positive lead.
Connect the negative lead to ground.Test the A/T shift lock solenoid as shown in image.
If the voltage is correct, go to step 5.
If the voltage is incorrect, replace the A/T shift lock solenoid or repair the wiring. Go to step 5.
5.
Test the park position switch:
Probe the red (R) wire on the backside of the connector to the A/T shift and key lock control module with a voltmeter positive lead. Connect the
negative lead to ground.
If the voltage is correct, go to step 6
If the voltage is incorrect, replace the park position switch or repair the wiring. Go to step 6.
6.
If the above components test within specification, replace the A/T shift and key lock control module.
PARTS INFORMATION:
