Elantra L4-2.0L (2004)
NOTE:
After the OCS has been reprogrammed, the seat cushion will be returned to your dealership so it may be reinstalled in the customer's vehicle.
12. When the reprogrammed seat cushion arrives, verify that you have received the correct seat cushion assembly.
13. Reinstall the cushion assembly in reverse order of removal.
14. Reinstall the seat and connect all connectors and wire tie clips.
Tightening torque for seat mounting bolts:
35~55 Nm (350-550 kgf.cm, 25~40 lb.ft)
15. Reconnect the battery cable, reprogram the radio stations, reset the clock, and verify no codes were stored in the SRS module.
WARNING:
Even if a vehicle is equipped with an OCS, do not install a child restraint system in the front passenger seat and do not permit children to sit in the
front passenger seat. The rear seat is the safest place for children. Infant and child restraints must be properly installed in the rear seat according to
their manufacturers' instructions to provide a safe ride for infants or small children.
WARNING:
Always wear seat belts when driving or riding in a motor vehicle. Seat belts are the vehicle's primary safety restraint system.
NOTE:
If the cushion is not returned to your dealership within 3 working days after shipping to the WTC, please contact for assistance.
WARRANTY INFORMATION:
Submit all claims using the Warranty Claim Entry Screen.
WARRANTY CLAIM SUBMISSION NOTES - PLEASE READ IN ITS ENTIRETY:
1. Submit all related expenses on one warranty claim.
2. All freight charges both to ship the cushion to the WTC and to return the cushion from the WTC to the dealer should be included in the Sublet
amount.
3. Shipments from the WTC to the dealer will be freight collect. Include the freight collect amount in Sublet.
4. All service loaner or rental car charges must be included in the Sublet amount.
5. If a service loaner or rental car is required for more than 5 days contact your District Parts and Service Manager (DPSM) for authorization.
6. Sublet code must be C1 - Customer Satisfaction.
