Elantra GLS Sedan L4-1.8L (1997)
Throttle Position Sensor/Switch: Adjustments
CLOSED THROTTLE POSITION SWITCH
Inspection
Verify that the closed throttle position switch (CTPS) is "ON" when the accelerator is in the released position.
NOTE: Check the CTPS ON / OFF condition by measuring the voltage between the CTPS switch connector and the ground wire.
Adjustment
Adjust the CTPS so the voltage readings correspond to specifications below.
Specifications:
-
CTPS ON (idle position): 0 Volts
-
CTPS OFF (other than idle position): 12 Volts