Elantra GLS Sedan L4-2.0L (1999)
If Elantra door trim panel fabric edges or concave areas peel or loosen in hot weather, it may be caused by an insufficient quantity of adhesive.
If the door trim panel fabric is confirmed to be loose, the door trim panel can be removed and sent to an experienced upholstery shop for repair.
Door Trim Panel Fabric General Repair Procedure:
1.
Remove the fabric panel from the door trim panel.
2.
Remove the fabric material from the fabric panel.
3.
Clean the old glue off of the fabric panel and fabric.
4.
Apply the proper adhesive (Keyston Bros. Adhesive or equivalent) to both the back side of the fabric and the fabric panel surface.
5.
Reinstall the fabric to the fabric panel.
6.
Reinstall the fabric panel to the door trim panel.
NOTE:
Each upholstery shop's repair methods may be slightly different, but should be consistent with this reconditioning procedure.
When the door trim panel is received from the upholstery shop, verify the following:
