Elantra GLS Sedan L4-2.0L (1999)
3. Inspect the brake lining and drum for proper contact.
4. Inspect the wheel cylinder outside for excessive corrosion and damage.
5. Inspect the backing plate for wear or damage.
INSTALLATION
1. Apply the specified grease to the locations indicated in the illustration and to each component.
-
Shoe and backing plate contact surfaces
-
Shoe and anchor plate contact surfaces
Recommended grease: Multipurpose grease SAE J310, NLGI No.2
2. Install the shoe hold down pin.
3. Assemble the return spring with the push rod shortened.
4. After assembling the drum components, pull the parking brake lever all the way up several times.
