Elantra GLS Sedan L4-2.0L (1999)
2. Remove the delivery pipe with the fuel injector and pressure regulator.
CAUTION
1. Be careful not to drop any injectors when removing the delivery pipe.
2. Be aware that fuel may flow out when removing the injector.
INSTALLATION
1. Install a new grommet and O-ring to the injector.
2. Apply a coating of solvent, spindle oil gasoline to the O-ring of the injector.
3. While twisting the injector left and right, Install it on to the delivery pipe.
4. Be sure the injector turns smoothly.
NOTE: If it does not turn smoothly, the O-ring may be jammed; remove the injector, re-insert it into the delivery pipe and re-check.
