Elantra GLS Sedan L4-2.0L (1999)
2. Install the backup washer and oil seal to the specified position in the gear housing.
3. Apply the specified grease to the entire surface of the needle bearing.
Recommended grease: Multi-purpose grease SAE J310, NLGI No. 2
4. Set the scribed side of the needle bearing in the special tool and install it into the gear housing (until the special tool contacts the gear housing).
NOTE: Note the direction of the needle bearing.
5. Apply the specified grease to the ball bearing and install using the special tool.
Recommended grease: Multi-purpose grease SAE J310, NLGI No. 2
NOTE: Always use a new bearing.
6. Apply the specified oil to the entire surface of the rack bushing oil seal.
Recommended fluid: PSF-3 type
7. Install the oil seal in the rack bushing.
8. Apply the specified oil to the entire surface of the O-ring and install it in the rack bushing.