Elantra GLS Sedan L4-2.0L (1999)
3. Install steering gear box assembly and stabilizer bar link to the vehicle.
4. Install lower arm bushing mounting bolts and nuts.
5. Install front and rear roll stopper brackets to the center member as illustration.
6. Install the center member assembly.
7. Temporarily tighten the front roll stopper bracket bolt. After the total weight of the engine has been placed on the vehicle body, securely tighten
the nut.
Tightening torque:
Center member mounting bolt: 60 - 80 Nm (600 - 800 kg.cm, 43 - 58 ft. lbs.)
Tightening torque:
Front roll stopper bracket to member bolt: 30 - 40 Nm (300 - 400 kg.cm, 25 - 29 ft. lbs.)
Tightening torque:
Rear roll stopper bracket to center member bolt: 30 - 40 Nm (300 - 400 kg.cm, 25 - 29 ft. lbs.)
Tightening torque:
Insulator to transaxle mounting bracket bolts: 45 - 60 Nm (450 - 600 kg.cm, 33 - 43 ft. lbs.)
