Elantra GLS Wagon L4-2.0L (2000)
4. Install front and rear roll stopper brackets to the center member as illustration.
5. Install the center member assembly.
6. Temporarily tighten the front roll stopper bracket bolt. After the total weight of the engine has been placed on the vehicle body, securely tighten
the nut.
Center member mounting bolt: 60 - 80 Nm (600 - 800 kg.cm, 43 - 58 ft. lbs.)
Front roll stopper bracket to member bolt: 30 - 40 Nm (300 - 400 kg.cm, 25 - 29 ft. lbs.)
Rear roll stopper bracket to center member bolt: 30 - 40 Nm (300 - 400 kg.cm, 25 - 29 ft. lbs.)
Insulator to transaxle mounting bracket bolts: 45 - 60 Nm (450 - 600 kg.cm, 33 - 43 ft. lbs.)