Elantra GLS Wagon L4-2.0L (2000)
1. Measure the brake drum inside diameter.
Check the runout of the brake drum using a dial indicator.
Inside diameter: 203.2 (8.00 inch) 205.2 mm (8.079 inch)
Out-of-rounded of brake drum: 0.015 mm (0.0006 inch)
2. Measure the brake shoe lining thickness.
Lining thickness:
4.05 mm (0.159 inch)
1.5(0.059) mm (inch)
3. Inspect the brake lining and drum for proper contact.
4. Inspect the wheel cylinder outside for excessive corrosion and damage.
5. Inspect the backing plate for wear or damage.
INSTALLATION
1. Apply a specified grease to the locations indicated in the illustration and to each component.
-
Shoe and backing plate contact surfaces
-
Shoe and anchor plate contact surfaces
Recommended grease: Multipurpose grease SAE J310, NLGI No.2