Elantra GLS Wagon L4-2.0L (2000)
5. Remove the glove box support bracket.
6. Disconnect the thermostatic switch connector.
7. Remove the evaporator upper and lower mounting bolts.
8. Remove the evaporator unit.
EVAPORATOR UNIT
9. Installation is the reverse order of removal.
NOTE:
1. While installing each of removed fitting, replace 0-ring (if exists) and apply specified lubricant.
2. Be careful not to bend or twist refrigerant lines in order to install them easily.
3. After installation, evacuate, charge and teat the air conditioning system.
