Elantra GLS Wagon L4-2.0L (2000)
17.
Replace the protective tube removed in step 4 over the MAF sensor connector wiring harness. Then tape the MAF sensor connector wiring harness
from the end of the protective tube to the end of the vinyl tube with electrical tape.
18.
Connect the MAF sensor connector and reinstall the MAF connector locking clip which was removed in Step 3 of this procedure.
19.
Reconnect the negative cable on the battery and check engine for proper starting.
20.
Set the radio station buttons to the customer's pre-set stations and verify reception in all bands (AM, FM1, FM2). Reset the clock to the correct
time.