Elantra GLS Wagon L4-2.0L (2000)
Harness Inspection Procedure (Steps 1 - 2)
SENSOR INSPECTION
1. Disconnect the knock sensor connector.
2. Measure resistance between the terminal 2 and 3.
Standard value about 5 MOhms [at 20 °C (68 °F)]
3. If the resistance is continual, replace the knock sensor.
Tightening torque
knock sensor: 16 - 28 Nm (160 - 250 kg.cm, 11.8 - 18.4 lb.ft)
4. Measure the capacitance between the terminal 2 & 3.
Standard value: 800 - 1600 pF
