Elantra GLS Wagon L4-2.0L (2000)
Recommended grease Multipurpose grease SAE J310, NLGI No. 2
NOTE: Do not plug the vent hole in the rack with grease.
10. Wrap the rack end with vinyl tape, coat with the specified fluid and then install the rack bushing and rack stopper.
NOTE: Do not allow oil seal retainer spring to slip out.
11. Push in the rack stopper until the circlip groove of the rack stopper is aligned with the notched hole of the rack housing. Install the circlip while
turning the rack stopper.
NOTE: The circlip end should not be visible through the notched hole of the rack housing.
12. Using a special tool, install the oil seal and the ball bearing in the valve body.
13. When installing seal rings, press firmly into valve groove. Apply specified fluid.