Elantra GT Hatchback L4-2.0L (2002)
2.
(Elantra only) Remove the glove box damper by gently pulling the mounting pin out, then feed the mounting pin through the hole. Hold/support
the glove box to prevent it from swinging wide open when the damper is removed. Lower the glove box.
3.
(Elantra only) Remove the 2 screws that hold the metal bracket at the back of the glove box housing. Lower the bracket out of the way. Proceed to
Step 7.
4.
(Tiburon only) (skip to Step 7 for Elantra). Remove 3 mounting screws at the outside bottom of the glove box.
5.
(Tiburon only) Remove 3 mounting screws at the inside top of the glove box.
