Entourage V6-3.8L (2009)
4. Select the sensor output. And then check the optical sensor volt while operating power tailgate in power mode.
5. Change the drive unit, if there is no change during operation.
Drive Unit Clutch Inspection
1. Check the power tailgate control module input/output value by using the diagnostic tool. If the operation of tailgate control module is abnormal,
replace power tailgate drive unit.
2. To check the clutch operation, select a vehicle type and "POWER SLIDING/TAILGATE" menu.
3. Select power tailgate.
4. Select the sensor output. And then check the clutch feedback sensor output while operating power tailgate in power mode.
** Above voltage and numerical value may be different from the real value.
5. Change the drive unit, if there is no change during operation.
