Entourage V6-3.8L (2009)
Power Door Lock Actuator: Testing and Inspection
Keyless Entry And Burglar Alarm
Inspection
Front Door Lock Actuator
1. Remove the front door trim panel.
2. Disconnect the 4P connector from the actuator.
3. Check actuator operation by connecting power and ground according to the table. To prevent damage to the actuator, apply battery voltage only
momentarily.
Sliding Door Lock Actuator
1. Remove the sliding door trim panel.
2. Disconnect the 6P connector from the actuator.
3. Check actuator operation by connecting power and ground according to the table. To prevent damage to the actuator, apply battery voltage only
momentarily.
