Entourage V6-3.8L (2009)
Brake Pad: Testing and Inspection
Front
Inspection Of Front Disc Brake Pad
1. Check the brake pad thickness through the caliper body inspection hole.
Pad thickness
Standard value : 10.5 mm ( 0.41 in)
Service limit : 2 mm (0.0787 in)
CAUTION:
-
If the pad thickness is out of specification, left and right pads must be replaced as a complete set.
-
When the thickness difference between the left pad and right pad is large, check the sliding condition of the piston and the guide rod.