Entourage V6-3.8L (2009)
Brake Hose/Line: Service and Repair
Repair Procedures
Removal
1. Remove the brake hose clip (A).
2. Loosen the brake tube (A) nut holding the brake hose (B) nut with a wrench.
3. Remove the brake hose (B).
4. Remove the brake hose connecting bolt (A) from the caliper assembly.
Installation
1. Install the brake hose (A) connecting bolt (B) and washer (C).
2. Tighten the brake tube (A) nut holding the brake hose (B) nut with a wrench.
