Entourage V6-3.8L (2009)
11. Using SST (09215-3C000) remove lower oil pan (A).
NOTE:
Be careful not to damage the contact surfaces of upper oil pan and lower oil pan.
12. Set a jack to the upper oil pan.
13. Remove the coolant reservoir tank.
14. Remove the engine mounting bracket (A).
15. Set No.1 cylinder to TDC/compression.
(1) Turn the crankshaft pulley and align its groove with the timing mark "T" of the lower timing chain cover.
NOTE:
Do not rotate engine counterclockwise.
(2) Check that the mark (A) of the camshaft timing sprockets are in straight line on the cylinder head surface as shown in the illustration.