Entourage V6-3.8L (2009)
Tire Pressure Module: Service and Repair
Replacement
NOTE:
When the receiver first arrives for replacement:
1) It will be in Virgin State.
2) It will not be configured for any specific platform.
3) It will not have any sensor ID's memorized.
CAUTION:
It is important to make sure that the correct receiver is used to replace the malfunctioning part i.e. Low line : 95800-3L500, High Line : 95800-4D100 in
order to have the correct inflation warning thresholds set.
1. Disconnect vehicle battery.
2. Remove malfunctioning part and fit bracket assembly to new part.
[Receiver]
3. Secure new part to vehicle and fit connector.
4. Re-connect battery and turn Ignition on.
5. Check that TPMS lamp flash rate matches Virgin State indication.
6. Connect 'TPMS exciter' to the diagnostic connector.